Skip to Content

4 Things to Avoid When Installing Your Child’s Car Seat

In order to make sure that your child is safe when you travel, you will need to install a car seat. It’s one of the most important investments you can make in order to assure your child’s safety. Did you know that car crashes are the leading cause of death for kids in this country?

You will need to not only purchase a car seat that has passed all the safety standards, but you will need to ensure that you install it correctly in your car.

Don’t wait until it is too late, and you will need to avail of the services of an accident attorney from Bell & Pollock before you ensure that the car seat is rightly installed. Take a look at the things you should avoid doing below.

1. Picking the wrong seat

The first thing you should make sure of is that you actually got the correct size for your child’s car seat.

Some think that any car seat is already okay, and they get it wrong. Some think that anything that fits their car is the right choice, but you should actually consider your child’s weight, height, and age when you pick a car seat.

Even if you have a budget, never settle for a car seat that is not brand new because you never know if they have missing parts or have suffered damages.

2. Not reading the instructions properly

Do not try to attempt to install the car seat without first reading the instructional manual.

It may seem like it is just simple equipment and that all you need is common sense to attach it, but it can be more complicated than you think. Even car seat professionals testify to the fact there are many car seats that were installed incorrectly.

To make certain that you are installing it the right way, read not only the manual for the car seat but the car manual itself.

3. Leaving the strap too loose

One of the biggest mistakes you can make is to have the harness too loose on your child.

It does not matter even if the car seat is placed properly because if the straps are too loose, it will not be any good in protecting your child in case of a car crash, as they can easily be thrown out or ejected from the vehicle. You should test to see that the harness is just right.

You can do this by doing what is called the pinch test. What you do is put your child on the seat belt and buckle them in. Make sure that it is snug enough. If you are able to pinch the top of the strap between your thumb and forefinger.

If you are able to do that, then it is still too loose, adjust the seat belt until you cannot pinch any extra material anymore.

4. Not going to a car seat inspector

The best way to know that you have done installing right is to have it checked by professionals. You’ll be surprised to see that what you think may have been a perfect installation will still have mistakes. With a certified child passenger or car seat inspector’s approval, you can have peace of mind.

Jeff Campbell